The NewTek GD Series Gage Head LVDTs are designed to work with a bipolar DC voltage, and have excellent linearity, high sensitivity and high resolution. They permit highly accurate readout and recording of an output signal directly without auxiliary signal conditioning electronics. These GD Series spring-loaded LVDTs are designed for a wide range of position measurement and dimensional gaging applications and available in ranges of 0.10 inch (2.5mm) to 4 inches (100mm).
Input Power: 15VDC, ±25mA Nominal
Full Scale Output: ±10VDC
Linearity: < ± 0.15% Full Range Typical
Hysteresis: <0.01% of Full Range Typical
Repeatability: <0.01% of Full Range Typical
Operating Temperature: 0° F to 185° F (-20° C to 85° C)
Thermal Coefficient: <-0.014%/°F (< -0.025%/°C) of Full Range
Humidity: 90% R.H., 240 Hours
Shock Survival: 1000 g, 11 ms
Vibration: 20 g to 2 KHz
Housing: Corrosion-resistant nickel-iron alloy
Core: Hi-permeability nickel-iron alloy
Magnet Wire: Film insulated copper
Connector: PT02A-10- 6P
Probe: AGD #9 contact tip
Features
- Spring loaded probe
- Welded hermetically sealed steel housing
- Measurement ranges from ± 0.05 to ± 2 inches
- Linearity ±0.15% of Full Range Typical
- Shock and vibration tolerant
- Choice of probe contact tips
- Standard and custom models available
Applications
- Pinch and Roller Alignment
- Dimensional Gaging
- Factory Automation
- Materials Testing
- Packaging Equipment
- TIR Measurements
