Gage Head ±10V Out

GD-750 Series

The NewTek GD Series Gage Head LVDTs are designed to work with DC voltage, and have excellent linearity, high sensitivity and high resolution. They permit highly accurate readout and recording of an output signal directly without auxiliary signal conditioning electronics. These GD Series spring-loaded LVDTs are designed for a wide range of position measurement and dimensional gaging applications and available in ranges of 0.10 inch (2.5mm) to 4 inches (100mm).

Input Power:                   ±15VDC, ±25mA Nominal
Full Scale Output:          0 to ±10VDC
Linearity:                   < ± 0.15% Full Range Typical
Hysteresis:                    <0.01% of Full Range Typical
Repeatability:               <0.01% of Full Range Typical

Operating Temperature:     0° F to 185° F (-20° C to 85° C)
Thermal Coefficient:         <-0.014%/◦F (< -0.025%/◦C) of Full Range
Humidity:                                90% R.H., 240 Hours
Shock Survival:                      1000 g, 11 ms
Vibration:                               20 g to 2 KHz

Housing:            Corrosion-resistant nickel-iron alloy
Core:                  Hi-permeability nickel-iron alloy
Magnet Wire:    Film insulated copper
Connector:        PT02A-10- 6P
Probe:                AGD #9 contact tip

Features

  • Spring loaded probe
  • Welded hermetically sealed steel housing
  • Measurement ranges from ± 0.05 to ± 2 inches
  • Linearity ±0.15% of Full Range Typical
  • Shock and vibration tolerant
  • Choice of probe contact tips
  • Standard and custom models available

Applications

  • Pinch and Roller Alignment
  • Dimensional Gaging
  • Factory Automation
  • Materials Testing
  • Packaging Equipment
  • TIR Measurements

Specifications

Dimensions & Wiring

Ordering

Warranty

NewTek products are warrantied against defective materials and workmanship for a period of one (1) year from the date of delivery to the original purchaser. NewTek accepts no liability for damages in the misuse of our products.

Contact NewTek Sensors to discuss your requirements