High Temperature

HT-1000 Series

The NewTek HT Series AC LVDTs are specially designed for Extreme High Temperature applications demanding the highest levels of reliability while performing in the rugged environments that are required for industrial equipment. These transducers are constructed of special high temperature materials, allowing them to operate up to 1000°F (538°C). The HT Series provide a ratiometric output, allowing their secondary difference voltages to be divided by their sum. This cancels thermal error, providing extremely low thermal sensitivity over a wide temperature range. These HT Series are available from ± 0.500 inch (± 12.7 mm) to ± 1.0 inch (±25.4 mm) and offer high sensitivity, high resolution and excellent linearity.

Input Voltage:                                     3 Vrms (Nominal)
Input Frequency:                                 400Hz to 10KHz
Linearity:                                             <±0.5% Full Range Typical
Null Voltage:                                        0.5% Full Range
Hysteresis:                                          <0.01% of Full Range Typical
Repeatability:                                     <0.01% of Full Range Typical
Body Weight (grams):                          300
Core Weight (grams):                           0.5

Operating Temperature:           -65° F to 1000° F (-55°C to 538° C)
Thermal Coefficient:                  25 ppm/°F (45 ppm/°C) of Full Range
Humidity:                                   90% R.H., 240 Hours
Shock Survival:                          1000 g, 11 ms
Vibration:                                   20 g to 2 KHz

Features

  • 1000°F operating temperature
  • 1 inch diameter stainless steel housing
  • Ratiometric output for reduced thermal error
  • Linearity ±0.5% of Full Range Typical
  • Through-bore design
  • Choice of imperial or metric threaded core
  • Standard and custom models available

Applications

  • Power Generation
  • Engine Control System
  • Furnace
  • Autoclave

Dimensions & Wiring

Ordering

Warranty

NewTek products are warrantied against defective materials and workmanship for a period of one (1) year from the date of delivery to the original purchaser. NewTek accepts no liability for damages in the misuse of our products.

Contact NewTek Sensors to discuss your requirements