LVDT Core Rod Kits & All-Thread Extension Rods

LVDT Core Rod Kits

LVDT Series Core Rod Kit External Thread "T2" Rod Diameter "D" Core-Mating Thread "T1" Thread Length "L2" Available Nominal Lengths "L1"
HA / HAR 750 CRK-188 10-32 UNF 0.188" 4-40 UNC 3" 8.5" 13.1" 15.6" 16.1" 20.0" 26.0"
HATR 750 CRK-188 10-32 UNF 0.188" 4-40 UNC 3" 8.5" 13.1" 15.6" 16.1" 20.0" 26.0"
HE/HER 750 CRK-188 10-32 UNF 0.188" 4-40 UNC 3" 8.5" 13.1" 15.6" 16.1" 20.0" 26.0"
HI/HIR 750 CRK-188 10-32 UNF 0.188" 4-40 UNC 3" 8.5" 13.1" 15.6" 16.1" 20.0" 26.0"
HD/HDR 750 CRK-188 10-32 UNF 0.188" 4-40 UNC 3" 8.5" 13.1" 15.6" 16.1" 20.0" 26.0"
I 750 CRK-188 10-32 UNF 0.188" 4-40 UNC 3" 8.5" 13.1" 15.6" 16.1" 20.0" 26.0"
E 750 CRK-188 10-32 UNF 0.188" 4-40 UNC 3" 8.5" 13.1" 15.6" 16.1" 20.0" 26.0"
D 750 CRK-188 10-32 UNF 0.188" 4-40 UNC 3" 8.5" 13.1" 15.6" 16.1" 20.0" 26.0"
M 375 CRK-110 4-40 UNC 0.110" 1-72 UNF 1" 2.0" 3.0" 4.5"

Ordering Information

CRK – XXX – YYYYY

CRK – Core Rod Kit

XXX – Rod Diameter

YYYYY – Rod Length “L” in thousandths of an inch

NewTek core rod kits mate seamlessly to standard LVDTs for simple installation and linking between the LVDT core and measured object.  Made of non-magnetic 300-series stainless steel, these rods provide a rugged connection without interfering with the magnetic coupling between the core and the LVDTs internal coils.

Each core rod kit includes the core rod, Loctite packet, and two (2) jam nuts.  One end of the core rod has male threads to connect to standard cores.  Using Loctite on this joint ensures a sturdy connection. the other end of the core rod has external threads that can mate directly to the measured object, or linked to a moving plate with use of the included jam nuts.

Upon request, NewTek engineering can offer assistance and suggest the appropriate core rod kit for any application or LVDT.  In addition to the standard lengths above, custom core rod kits are also available.

LVDT Threaded Extension Rods

LVDT Series Extension Rod Thread "T" Available Lengths "L" (ft)
R 750 / R 812 AT-640 6-40 UNF 1, 2, 3
HA / HAR 750 AT-440 4-40 UNC 1, 2, 3
HATR 750 AT-440 4-40 UNC 1, 2, 3
HE/HER 750 AT-440 4-40 UNC 1, 2, 3
HI/HIR 750 AT-440 4-40 UNC 1, 2, 3
HD/HDR 750 AT-440 4-40 UNC 1, 2, 3
I 750 AT-440 4-40 UNC 1, 2, 3
E 750 AT-440 4-40 UNC 1, 2, 3
D 750 AT-440 4-40 UNC 1, 2, 3
M 375 AT-172 1-72 UNF 1, 2, 3

Ordering Information

AT – XXX – YYYY

AT – Threaded Extension Rod

XXX – Thread  (See Table)

YYYY – Rod Length “L” in inches

NewTek all-thread extension rods are available in all standard LVDT core threads and are sold by the foot.  Ideal for bench top applications or industrial settings, extension rods can be cut to the exact length required to link the LVDT core to the measured object.  Newtek engineering can assist when specifying the appropriate extension rod or length.

Contact Us Regarding Your Requirement